Quality Inspection for Electric Water Boilers - Steam&Hot Water Pipe – Double Rings
Quality Inspection for Electric Water Boilers - Steam&Hot Water Pipe – Double Rings Detail:
Products Description
| Structure | Steel pipe– insulation layer–steel jacket pipe |
| Steel pipe process | 1. Seamless, 2. Spiral steel pipe( SAW) 3. Straight steel pipe(ERW） |
| Insulation layer of external sliding type | Fiberglass wool or rock wool |
| Insulation layer of internal sliding type | 1. Calcium silicate insulation material 2. Polyurethane insulation material |
| Application | 1. Steam 2. Hot oil 3. Hot material |
| Specification | DN57-1020mm(1 inch-64 inch) |
| Medium temperature | 150-350℃ |
| Medium pressure | Less than 2.5MPa |
| Advantages
|
1. The heat-insulating material has the advantages of light, durability, excellent heat preservation performance, low heat consumption and maximum utilization of heat energy. 2. Vacuum extraction technology can be used to effectively prevent the corrosion of internal and external steel pipes. 3. Special material heat insulation is adopted between the sliding bracket and the steel pipe to effectively solve the heat bridge problem in the pipe network, and the heat loss of the pipeline is reduced |
| Related products | 1. Joint materials(steel sleeve, insulation material) 2. Fittings（tee, elbow, reducer,adapter） |
Product detail pictures:
Related Product Guide:
Boiler Structure
Our intention is usually to satisfy our buyers by offering golden provider, great rate and good quality for Quality Inspection for Electric Water Boilers - Steam&Hot Water Pipe – Double Rings , The product will supply to all over the world, such as: Japan, luzern, Serbia, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we will continue to develop, to provide the high-quality products and services, and promote lasting cooperation with our customers, common development and create a better future.
By Elaine from Cannes - 2018.10.31 10:02
Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
By Rosalind from South Korea - 2018.09.19 18:37
Related products
-
factory Outlets for Steam Boiler Electric - Bo...
Used in Boiler Introduction The sub-cylinder is the main supporting equipment of the boiler. It is used to distribute the steam generated during the operation of the boiler to various pipelines. The sub-cylinder is a pressure-bearing equipment and belongs to a pressure vessel. Its pressure-bearing capacity and capacity should correspond to the supporting boiler . Main pressure components The main pressure components of the sub-cylinder are: head, shell material, etc. Usage The sub-cylin...
-
Free sample for Stoker Boiler - Boiler Flue &#...
Used in Boiler Introduction Industrial smoke exhaust, air into the pipe, the pipe is equipped with a damper (valve) to regulate the wind speed and pressure in the pipe. It is composed of furnace wall, partial heating surface pipe and cladding wall pipe to guide the flow of smoke, and through each heating surface for heat exchange, divided into horizontal flue and tail flue. The main smoke duct section size of the large capacity boiler is very large, in order to bear and transfer the loa...
-
Factory made hot-sale Boiler Accessory - Boile...
Used in Boiler Tank accessories (1) Water inlet pipe: The water inlet pipe of the water tank is generally connected from the side wall, but it can also be connected from the bottom or top. When the water tank USES the pipe network pressure to fill the water, the inlet pipe outlet should be equipped with a floating ball valve or hydraulic valve. Generally, there are not less than 2 floating ball valves. The diameter of the ball float valve is the same as that of the inlet pipe, and each ...
-
Reliable Supplier Boiler Operating - Single Dr...
Parameter : DZG（L）Bearing Pressure Hot water boiler Main Technology Parameter List Model DZG0.7-0.7/95/70 DZL0.7-0.7/95/70 DZG1.4-0.7/95/70 DZL1.4-0.7/95/70 DZL1.4-1.0/115/70 DZL28-1.0/115/70 DZL2.8-1.25/130/70 DZL4.2-1.0/115/70 DZL4.2-1.25/130/70 Rated Capacity T/h 0.7 1.4 2.8 4.2 Rated Working Pressure Mpa 0.7 0.7/1.0 1.0/1.25 1.0/1.25 Rated Steam Temp. ℃ 95 95/115 115/130 115/130 Feed Water Temp. ℃ 70 70 70 70 Fuel Consumption Kg/H ~150 ~310 ~590 ~900 Thermal Efficiency ...
-
Bottom price Coal Fired Boiler - SHX Circulati...
Introduction: As a new type of mature high-performance with low-pollution clean coal technology. circulating fluidized bed combustion(CFBC)technology is unlike others that it has a lot of unique characteristics. 1. Circulating fluidized bed is of low-temperature combustion, therefore nitrogen oxides emissions of such boiler is much lower than that of coal-powder boiler, and such boiler could directly desulfurize during combustion process. Circulating fluidized bed boiler with high desulfuriza...
-
Cheap PriceList for Best Oil Fired Boilers - B...
Quality Control 1 Strength Calculation Report for Applied Materials after Inspection Machine inspected. 2 100%NDT(non-destructive inspection) report of steel plate,tube and welding rod; 3 100% X-ray inspection report (welding seam):to ensure the quality of the entire boiler; 4 Hydraulic test report:ensure the standard working pressure and safety; 5 Third-party inspection report:by Special Equipment Safety Supervision Inspection Institute of Jiang Su Province 6 Manufacturer Produc...
