Best-Selling Small Boiler - DHL Corner Tube Bulk Water Pipe Boiler – Double Rings
Best-Selling Small Boiler - DHL Corner Tube Bulk Water Pipe Boiler – Double Rings Detail:
Introduction:
As a new type of mature high-performance with low-pollution clean coal technology.
circulating fluidized bed combustion(CFBC)technology is unlike others that it has a lot of unique characteristics.
1. Circulating fluidized bed is of low-temperature combustion, therefore nitrogen oxides emissions of such boiler is much lower than that of coal-powder boiler, and such boiler could directly desulfurize during combustion process. Circulating fluidized bed boiler with high desulfurization rate is economical.
2. Circulating fluidized bed boiler could adopt various coal types and has high combustion efficiency, which is especially suitable for low quality, low calorific value coal.
3.The ash of circulating fluidized bed boiler is of high activity, thus it is easy to realize comprehensive utilization without secondary pollution.
4.Circulating fluidized bed boiler could adjust its load in a wide range. Lowest load can be reduced to 30% Of full capacity.
Our recommendation—the of low magnification circulating fluidized bed boiler products have completely solved the problems like boiler abrasion, slagging and ash blocking of feed recycle device.original emission concentration of boiler and deslagging. Now the requirement on environmental protection is increasingly strict.As raw coal’s proportion of direct-fired is high. which makes the contradiction between coal and environmental protection more and more acute. Under such background, circulating fluidized bed boiler with the features of environmental protection and energy saving is your best choice.
Quality Control
| 1 | Strength Calculation Report for Applied Materials after Inspection Machine inspected. |
| 2 | 100%NDT(non-destructive inspection) report of steel plate,tube and welding rod; |
| 3 | 100% X-ray inspection report (welding seam):to ensure the quality of the entire boiler; |
| 4 | Hydraulic test report:ensure the standard working pressure and safety; |
| 5 | Third-party inspection report:by Special Equipment Safety Supervision Inspection Institute of Jiang Su Province |
| 6 | Manufacturer Produce Level Grade-A. Product Reach European Standard CE Marks. |
Inspection Machinery for the Boiler in Workshop and Laboratory :
| No. | Name | Model | Qty |
| 1 | Digital Carbon & Sulfur Analysis Meter | HV-4B | 1set |
| 2 | High Speed Self-Ignition Furnace | HB-2H | 1set |
| 3 | Electric Scale | JA1003 | 1set |
| 4 | Photometer | 723 | 1set |
| 5 | Metallography Scale | XJB-2A | 1set |
| 6 | Hydraulic Multi-propose Test Machinery | WE-100 | 1set |
| 7 | WE-600A | 1set | |
| 8 | Concussion Testing Machine | JB-30 | 1set |
| 9 | Projective Meter | JS | 1set |
| 10 | X Ray Crack Detector | XXH3005 | 1set |
| 11 | XXH2505 XXXXH23005 | 2sets | |
| 12 | XY2515 | 2sets | |
| 13 | Ultrasonic Crack Detector | CTS-22 | 2sets |
Product detail pictures:
Related Product Guide:
Boiler Structure
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Best-Selling Small Boiler - DHL Corner Tube Bulk Water Pipe Boiler – Double Rings , The product will supply to all over the world, such as: Melbourne, Italy, Nigeria, To keep the leading position in our industry, we never stop challenging the limitation in all aspects to create the ideal products. In his way, We can enrich our life style and promote a better living environment for the global community.
By Quyen Staten from Algeria - 2018.12.11 14:13
Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
By Marcy Real from Irish - 2017.09.09 10:18
Related products
-
Rapid Delivery for Condensing Gas Boilers - he...
Introduction: Main Performance Parameter List Steam Pressure 1.0~2.5 Mpa Inlet Temperature 250℃ Saturation Temperature 179℃ Heating Water：Inlet Temperature 90℃； Outlet Temperature 140℃
-
Special Design for Heating Water Boiler - Boil...
Used in Boiler Introduction Industrial smoke exhaust, air into the pipe, the pipe is equipped with a damper (valve) to regulate the wind speed and pressure in the pipe. It is composed of furnace wall, partial heating surface pipe and cladding wall pipe to guide the flow of smoke, and through each heating surface for heat exchange, divided into horizontal flue and tail flue. The main smoke duct section size of the large capacity boiler is very large, in order to bear and transfer the loa...
-
Special Design for Heating Water Boiler - Coal...
Reducer used in DR Boiler • The main parts adopt high quality carbon structural refined steel.With high strength, high transmission efficiency and reliable operation, long service life, etc. • Respectively using multilevel, stepless frequency conversion speed regulating mode. User can reasonably match speed reducer according to the different operation condition of boiler.With the features of easy operation, energy saving, etc • With characteristics of large transmission torque and speed...
-
Hot New Products Diesel Boiler - Installation ...
Installation Procedure Step 1. Slag Extruder put into Foundation| Step 2. Lift Boiler Body to Foundation . Then install the Platform and Stair. Step 3.Connect Boiler，Economizer (Down Part) and Gas Flue. Step 4. Connect Economizer ( Up Parts) and Gas Flue. Step 5.Use asbest rope to Fix Economizer and Gas Flue. Keep no gas leak. Step 6. Lift Dust Cleaner to Foundation. Step 7.Connect and fix the Gas Flue between Dust Cleaner and Economizer . Step 8. Lift I.D Fan to Foundation Step...
-
Super Purchasing for Coal Fired Boilers - Coal...
I.D fan used in Coal Boiler boiler induced draft fan is designed for the industrial boiler (1-20T / h) or domestic boiler equipped with various coal quality and smoke and dust removal device. It can be selected for the same air inlet conditions and performance, but the high temperature is ≤ 250 ℃. Before induced draft, a dust removal device with efficiency ≤ 85% must be installed to ensure that the dust content of flue gas entering the fan is 400mg/m3
-
Factory Free sample Outdoor Coal Boiler - Coal...
Slag Remover used in Coal Boiler Introduction The Slag Remover is a kind of boiler slag tapping equipment. The carbon slag produced after the coal is burned in the boiler is pushed to the slag storage pit by the grate, and is dragged out of the furnace by the slag machine to clear the slag accumulation. Technology The high-temperature slag discharged from the furnace is first crushed into small pieces by a pair-roller slag breaker, which is convenient for cooling and transportation; th...
